System 10 PRO Rack-Mount Digital Wireless System

System 10 PRO Rack-Mount Digital Wireless System System 10 PRO Rack-Mount Digital Wireless System System 10 PRO Rack-Mount Digital Wireless System System 10 PRO Rack-Mount Digital Wireless System System 10 PRO Rack-Mount Digital Wireless System System 10 PRO Rack-Mount Digital Wireless System
System 10 PRO Rack-Mount Digital Wireless System
ATW-1301
System 10 PRO Rack-Mount Digital Wireless System

Overview

2.4 GHz 24-bit / 48kHz Digital wireless system No interference, as operates outside of DTV ;or 3G bands Automatic Frequency Selection. Plug & Play. Ease of use and reliability Offers 3 levels of diversity (frequency, time and space) to ensure communication without interference Rackable metal chassis, comes with a removable receiver (Kit setting rack included) Possibility of 2 interchangeable receivers per chassis Users can pair each receiver with up to 10 transmitters 2 frames or 4 receivers can fit in a 19" 1U rack Possibility to chain up to 5 frames (10 receivers) using RJ12 type cables (one cable per system) Up to 10 systems can be used simultaneously without any frequency coordination problems or group selection Hi-Fi audio quality over the whole frequency range (20 Hz to 20 kHz) No compression during transmission and reception for clear, natural sound

Features

  • The Audio-Technica "System 10 Pro" rack-mountable digital wireless system is so simple to use, so dependable and so automatic that you'll never have to think about it
  • Set it up anywhere, turn it on and its good to go
  • Like the rest of the range System 10, the System 10 Pro works in 24-bit / 48 kHz, and allows easy use while ensuring clear and natural sound quality
  • The system offers three levels of diversity: frequency, time and space
  • Frequency diversity sends the signal to two frequencies allocated for communication without interference
  • The time diversity sends the signal in several time slots to optimize immunity against multipath interference
  • Finally, space diversity uses two antennas on each transmitter and receiver to maximize signal integrity
Tech Specs

Technical Specification

SKU ATW-1301
Frequency Response 20 Hz to 20 kHz Depending on microphone type
Accessories Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet
Audio Sampling 24 bit / 48 kHz
Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Output connector (Microphone) Remote Receiver Connector: RJ45
Battery Type Two 1.5V AA
Battery Life >7 hours (alkaline) Depending on batt. type & use pattern
RF Power Output 10 mW
Maximum Output Level XLR 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Link Connector RJ12
Operating Frequencies 2.4 GHz ISM band
Total Harmonic Distortion <0.05% typical
Dynamic Range >109 dB (A-weighted), typical
Operating Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Dimensions 209.8 mm (8.26") W x 44 mm (1.73") Hx 169.3 mm (6.67") D
Related Products
Enquiry

Product Enquiry

Downloads

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.