Cardioid Condenser Clip-on Instrument Mic

Cardioid Condenser Clip-on Instrument Mic Cardioid Condenser Clip-on Instrument Mic Cardioid Condenser Clip-on Instrument Mic Cardioid Condenser Clip-on Instrument Mic
Cardioid Condenser Clip-on Instrument Mic
PRO35
Cardioid Condenser Clip-on Instrument Mic

Overview

UniMount® clip permits accurate positioning, provides shock resistance and protects element Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Extended frequency response captures subtle nuances of the performance 6' (1.8 m) cable permanently attached to microphone

Features

  • Designed for sax, toms, brass and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances
  • Its extended frequency response captures subtle nuances of the performance
  • The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element
  • The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
Tech Specs

Technical Specification

SKU PRO35
Frequency Response 50-15,000 Hz
Impedance 250 ohms
Cable 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
Open Circuit Sensitivity -45 dB (5.6 mV) re 1V at 1 Pa
Output connector Integral 3-pin XLRM-type
Phantom Power Requirements 11-52V DC, 2 mA typical
Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D
Signal to Noise Ratio 64 dB, 1 kHz at 1 Pa
Dynamic Range 115 dB, 1 kHz at Max SPL
Dimensions DIMENSIONS (MICROPHONE) 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameterDIMENSIONS (POWER MODULE) 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
Related Products
Enquiry

Product Enquiry

Downloads

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.