Dual-element Cardioid Instrument Microphone

Dual-element Cardioid Instrument Microphone Dual-element Cardioid Instrument Microphone Dual-element Cardioid Instrument Microphone Dual-element Cardioid Instrument Microphone Dual-element Cardioid Instrument Microphone
Dual-element Cardioid Instrument Microphone
AE2500
Dual-element Cardioid Instrument Microphone

Overview

The ultimate kick-drum mic, the Artist Elite AE2500 dual-element instrument microphone features cardioid condenser and dynamic capsules combined in one housing. The dynamic element delivers the aggressive attack of the beater; the condenser captures the round tonalities of the shell. Two layers of resistive mesh form multiple densities over the dynamic element’s side-entry ports, exercising precise control over the time at which off-axis signals arrive at the diaphragm. The condenser diaphragm is optimally tensioned and aged for long-term consistency and stability.

Features

  • Revolutionary dual-element design represents a ground-breaking transducer achievement
  • Two elements (condenser and dynamic) are enclosed in a single housing Dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell
  • Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones
  • Robust design for enduring dependability on the road Integral 80 Hz HPF switch and 10 dB pad on condenser element Includes isolation clamp for shock protection, secure mounting and easy positioning Includes a 16'5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors) for separate control over each element
Tech Specs

Technical Specification

Frequency Response 20-17,000 Hz (condenser), 30-10,000 Hz (dynamic)
Impedance 100 ohms (condenser), 600 ohms (dynamic)
Cable 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors
Element Condenser, dynamic
Polar Pattern Cardioid
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave (condenser)
Open Circuit Sensitivity 51 dB (2.8 mV) re 1V at 1 Pa (condenser),54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
Output connector Integral 5-pin XLRM-type
Phantom Power Requirements 11-52V DC, 3 mA typical (condenser)
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D. (condenser);158 dB SPL, with 10 dB pad (nominal)
Signal to Noise Ratio 70 dB, 1 kHz at 1 Pa (condenser)
Switches (Condenser Only) High-pass filter;10 dB pad (nominal)
Dynamic Range 124 dB, 1 kHz at Max SPL (condenser)
Dimensions 6.50" (165.0 mm) long,2.17" (55.0 mm) maximum diameter
Related Products
Enquiry

Product Enquiry

Downloads

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.